RXT 35S
RXT 35S
Terminals available inside a IP65 terminal box on a threated nickeled brass bolts
The casing of the RXT series uses RMS nude wire-wound spark plugs. The frame of the enclosure is made of galvanized steel and has an IP23 degree of protection. The power terminals are nickel plated brass screw terminals and are found inside a terminal box. The box is equipped with thermal pad with proper terminal on the outside of the metal strap.
Overview Table
| Min Resistance |
0.27 |
| Max Resistance |
110 |
| Tolerance (%) |
±10% |
| Rated Continuos Power (W) |
8500 |
| Protection Degree (IP) |
IP23 |
| Not Inductive |
no |
| Operating Voltage (V) (Clarification on Voltage definitions.pdf) |
1000 |
| Adjustable |
no |
| Thermal switch |
yes |
| UL |
yes |
| Weight |
30 |
These options are available for this product:*
IP20 enclosure,AISI 304 enclosure,AISI 316L marine enclosure *Options must be ordered separately. Contact Fairfild directly.In what sectors is this resistance used?
The main areas of application are industrial automation and the energy sector.For what types of applications is it used?
The product is used: as a dynamic braking resistor, as grounding of the neutral resistance, as a motor starting resistance and as a load resistor.What are the electrical specifications?
The RXT family provides for 9 models with power ratings from 3 kW to 120 kW. The models that can be purchased from the website have a power range between 3 kW and 20 kW. The ohmic value varies from 0.13 Ω to 560 Ω. The maximum voltage of use is 1000 V.What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value.What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate. The rated power value indicated in the data sheet refers to a temperature on the cap of about 200°C.
To dissipate efficiently, unit must be mounted with at least 150 mm / 5.9 in of available space from the bottom, 500 mm / 19.68 in on the sides and 1000 mm / 39.37 in on top. 4 holes diam. 11 mm / 0.43 in are provided to fix the resistor on the bottom side. Fairfild may provide upon request the brackets to mount the resistor 150 mm / 5.9 in above the ground and the grid to prevent the inlet of external elements from the bottom.
HELP DESK
Our customer service is always available to help you choose the product that best suits your needs.
