RDF DATASHEET

ALUMINIUM CASE POWER RESISTOR

0.75kW ÷ 15kW

Hermetic sealed aluminum heat sink case resistor

IP54, Wire coiled inserted in ceramic tube and filled with quarzite sand, Sealed by dielectric cement

Dynamic braking, Charge/discharge capacitor

Industrial automation, Energy

Ohmic values out of range, Special tolerance on resistance (2%, 1%), Different cable length, Thermal switch

Marking

The resistor is marked on the collar with indelible ink high temperature FAIRFILD – RDF 1100 15R 5% WW/YY (week / year)

Installation

Warning: Units must never be mounted with the terminals uppermost

Packing

The resistor is packed in a way to preserve incidental damages due to transport. To avoid resistor’s break we recommend to never take it from the cables and to handle with care inside the original boxes provided by the factory.

Disclaimer

Every effort has been made to ensure that the information in this datasheet is accurate. Fairfild is not responsible for printing or clerical errors. All properties and characteristics mentioned in this datasheet are only for informational purposes. The information in this datasheet is offered solely for your consideration and should not be taken as a warranty or representation for which we assume legal responsibility. The customer bears all responsibility for use and application of Fairfild products. There is no responsibility of the manufacturer for any damage to persons and properties in case of improper use. Fairfild reserves the right to change specifications without prior notice.

Copyright

This datasheet is subject to copyright. Fairfild reserves all rights of translation in any language, reprinting, re-use of illustrations.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, without the written permission of the copyrighted owner Fairfild, Italy. Violations may be subject to legal proceedings involving monetary damages as well as compensation for costs and legal fees under Italian copyright law and regulation within the European Union.

Ordering information

RDF/Y XXX RRRR 5%

Y T : External thermal switch 160±5°C (rated voltage: 250 V; rated current: 16 A; leads Faston 6.3)

XXX Model 750, 1100, 1500

RRRR Resistance value (nominal at 20°C)

Example

RDF 1100 15R 5%

RDF is the name of the product 1100 is the model

15R means 15 Ω that is the nominal ohmic value at 20°C

5% is the tolerance on the ohmic value, in this case the value of the resistor is accepted when is within 14.25 Ω ÷ 15.75 Ω