RC TC 110
RC TC 110
Tubolar ceramic support
The RC is a wire resistance wound on a ceramic tubular support coated with inorganic phosphate cement. The purpose of the coating is to (1) ensure the mechanical protection of the wire, (2) allow a uniform heat distribution and (3) limit thermal expansion of the coils. The coating does not have an electrical insulation function. The RC is available in the low inductance version; in this case, it is called RCN; it is available with an adjustment slider; in this case, it is called RCR; and with a fixed intermediate socket, in this case, it is called RCP. The latter cannot be purchased through e-commerce, please contact our sales department: sales@dev.fairfild.com.
Overview Table
| Min Resistance |
5.6 |
| Max Resistance |
75000 |
| Tolerance (%) |
±5% |
| Rated Continuos Power (W) |
110 |
| Protection Degree (IP) |
IP00 |
| Not Inductive |
No |
| Rated insulation voltage (V) (Clarification on Voltage definitions.pdf) |
1800 |
| Adjustable |
no |
| Thermal switch |
no |
| UL |
no |
| Weight |
0.135 |
These options are available for this product:*
ohmic values out of range,special tolerance on resistance (2%, 1%)*Options must be ordered separately. Contact Fairfild directly.
In what sectors is this resistance used?
The main areas of application are industrial automation, energy and railway sector.For what types of applications is it used?
The product is used: as a dynamic terminating resistor, as a basic element in harmonic filter circuits, as a basic element for neutral earthing resistors, in RC circuits as the device for charging and discharging the capacitors and as a heating resistor for electrical panels.What are the electrical specifications?
The RC family has 10 models with power ratings from 15 W to 300 W and the ohmic value ranges between 1.6 Ω and 91k Ω. The nominal voltage varies depending on the model.What are the overload conditions?
The resistance can be overloaded with respect to its nominal power based on the working cycle (insertion and rest time). For duration pulse less than one second, the overload permissible also depends on the ohmic value. For non-repetitive pulses the relation is 5 times the nominal power for 10 seconds and 10 times the nominal power for 5 seconds.What is the temperature of the resistance?
The temperature of the resistance depends on the power that it will dissipate. Numerous factors influence the dissipation capacity; please consult our technical data sheet for detailed information. The graph of the data sheet on page 3 shows the relationship between the temperature on the resistance and the power applied for a heating element placed horizontally.
SUPPORTO ISOLANTE SA/1 Diam. 20 x165
SUPPORTO SC 16/20 A
SUPPORTO SC 16/20 T
SUPPORTO SQ 16/20 A
SUPPORTO SQ 16/20 T
HELP DESK
Our customer service is always available to help you choose the product that best suits your needs.
